Introduction:

GG-004D Timer controls up to 8 stations and one valvefor each station.Solar powered. No need of power linein the field.

GG-004DTimer, every station has own independent irrigating schedule.

The moisture sensor is function as rain sensor. sets up wet control level or rain sensibility, when moisture sensor reading reached this setup level, will reduce duration of irrigation, or no start irrigation.

Model	Picture	Standard package	Adde to Cart
GG-004D-1		Solar Powered Controller with stainless box(1) Latching solenoid magnetic 1” valve(1) Moisture sensor(1) 12V 2300mAh battery(1)	$457.00
GG-004D-2		Solar Powered Controller with steel box(1) Latching solenoid magnetic 1” valve(1) Moisture sensor(1) 12V 2300mAh battery(1)	$366.00

Specifications

Power supply: Solar panel 17.4V DC, 220mA, 3.8W

Back up battery: 12V, 2.3Ah NMH battery

Control box size: 700px x 17.5 x 705px

Valve: Up to 8 valves

DC latching valve (6-12V), control pulse width is 80 ms, Working pressure: 0.14-1.5Mpa

motor valve, control time: 45s

3.Operating Power:

Controller idle current ≤3mA (No LCD backlight, moisture sensor not operating, no irrigation.

Moisture sensor operating current ≤ 50mA

Moisture Sensor Scan cycle: Moisture sensor/Rain sensor, every 1 minutes.

Operating temperature range: -10～55℃

Weatherproofing: IEC 60529 Class 56

Good Features:

Solar powered, low carbon green power, great for outdoor applications.

Controls opening/closing of up to 8 valves. For big garden or cultivated area with not enough water pressure for irrigating all at once.

Match valves: Latching valve, 12V DC valve, or relay switch closure with less than 24V AC with external power supply. All valves must be the same type

LCD has backlight, turns on automatically when power on or push any button.Turn off with no action after one minute.

Each valve has one manual switch with 3 pen/close/autopositions.

Can wire one 12V DC relay to control one pump.

System is easy to install, easy to use.

Rugged cabinet shell design.

Drive other valves with external power through relay. With test mode and working mode

“Timer control” mode:

Each station with independent schedules.

Each day has 3 schedules, 7 days a cycle.

The moisture sensor would be used as a rain sensor. Set up maximum wet control level, the controller will turn off if moisture reading reached this setup, or no turn on.

The LCD will show in sequence: Moisture level collected by the rain sensor, system time, and 8 valves open/close status.

The moisture sensor should be installed inside the irrigated area.

Standard Package:

GG-004D Solar Powered Main Controller(1)

Latching solenoid magnetic 1” valve(1)

Moisture sensor(1)

12V/2300Ah Battery(1)

Accessories：

P/N	Picture	Description	Price
Mvalve-01		【1" Plastic DC latching valve    Yaofeng】 Working voltage:6~40V; Working pressure: 0.05~0.6Mpa, Flow range: 3.8~113.6 L/min; Connector size:1" NPT thread；	$15.43
Mvalve-09		【1"  plastic DC latching valve    Hunter】 Working voltage:9-20V Working pressure：1.5~15.0bar, 150 ~ 1000kPa Flow range: 0.06~9m3/h             Connector size:1" NPT threa
Mvalve-10		【1.5"  plastic DC latching valve  Hunter】 Working voltage:9-20V Working pressure：1.5~15.0bar; 150 ~ 1000kPa Flow range:: 4~34m3/h             Connector size:1.5"NPT thread
Mvalve-11		【2"  plastic DC latching valve   Hunter】 Working voltage:9-20V Working pressure：1.5~15.0bar, 150 ~ 1000kPa Flow range: 9~45 m3/h             Connector size:2" NPT thread
Mvalve-12		【3"  plastic DC latching valve   Hunter】 Working voltage:9-20V Working pressure：1.5~15.0bar, 150 ~ 1000kPa Flow range: 34~68 m3/h             Connector size:3" NPT thread
Battery-03		NiMH Rechargeable battery 12V/2300mAh	$24.4
VcabelB-5m		Extention cable with connectors for magnetic valve, total 5 meters Cable: 2core	$3.69
VcabelB-10m		Extention cable with connectors for magnetic valve, total 10 meters Cable: 2core	$6.44
VcabelB-20m		Extention cable with connectors for magnetic valve, total 20 meters Cable: 2core	$11.95
Scable-1-5m		Extention cable  with connectors for moisture sensor,5 meters Cable:3core	$4.07
Scable-1-10m		Extention cable  with connectors for moisture sensor,10 meters Cable: 3core	$7.21
Scable-1-20m		Extention cable  with connectors for moisture sensor,20 meters Cable: 3core	$13.59
Scable-1-30m		Extention cable  with connectors for moisture sensor,30 meters Cable: 3core	$19.92
Scable-1-50m		Extention cable  with connectors for moisture sensor,50 meters Cable: 3core	$32.33
Msensor-02		【Moisture Sensor】	$98.00